PC Products 60th Anniversary

Read a great article on how to restore pottery, ceramics, porcelain and sculptures. See how the PRO's do it using our products!

Click Here



Recommend-a-lator 3000 Where to Buy!
Enter your email address to receive our
free tips, tricks and product news!



Unlock the Lost Videos!

products
paste epoxies

Super Epoxy

Translucent Paste Epoxy

super-epoxy

Description:
PC-Super Epoxy® is a non drip translucent paste epoxy with unlimited uses in bonding, sealing, and as a filler for most materials. From Home owners, Do-It-yourselfers, and professionals such as stair installers PC-Super Epoxy® is the perfect all around adhesive! This paste epoxy was formulated to be extremely versatile, flexible, and resilient with enormous strength. Unlike our other paste epoxies PC-Super Epoxy® is designed to be fast curing. PC-Super Epoxy® has a viscosity similar to Vaseline making overhead and sidewall work easy without drip or sag. Stair installers just love this product for installing iron balusters. PC-Super Epoxy® demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Bonds most everything to anything.
***Note: PC-Super Epoxy® will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combination. Test a small area when in doubt.

print

Directions:
1oz syringe
  • Remove storage cap from plunger and keep available.
  • Cut tips off end of dispenser(be careful)
  • Depress plunger evenly to dispense equal amounts of resin and hardener. Back off plunger to reduce flow.
  • Mix thoroughly on flat surface using a mixing stick or putty knife until blue disappear
  • Replace storage cap on nozzle
static injectors- 300ml
  • Remove collar and nozzle plug.
  • Insert mixing nozzle into collar and attach to cartridge.
  • Load cartridge into dispensing gun.
  • Dispense epoxy. To stop flow press gun brake.
  • Remove nozzle and reinsert nozzle plug or dispose of empty cartridge in proper way.
static injectors-50ml
  • Remove nozzle cap (1/4 turn)
  • Attach nozzle (1/4 turn)
  • Insert cartridge into dispensing gun
  • Dispense epoxy. To stop flow press gun brake.
  • Remove nozzle (1/4 turn) and reinsert nozzle cap or dispose of empty cartridge in proper way.

Using separate knives to remove amount needed, mix equal parts A (light yellow) and B (blue) on flat clean surface until uniform color is achieved. Surfaces to be bonded must be free of dirt, oil, rust, ect. Denatured alcohol can be used to prep the surface. For best results, rough up the surface to be bonded. Normally, no vice or clamp needed. Prop or tape heavy objects to a wall or ceiling.

Apply PC-Super Epoxy® in any thickness to both sides of surface and bring together firmly. Be careful to insure that ample PC-Super Epoxy® remains between the contact surfaces. Use screen wire or fiberglass cloth to reinforce large voids and gaps. To smooth out work, dip tool in lacquer thinner or denatured alcohol.

After cure: Paint Drill, Machine, Sand, File, Tap, or Saw.

Additional Information

Available Sizes - Links to Purchase:

  • UNIT SIZES
  • PART #
  • PURCHASE LINKS
  • 1 OZ
  • 016619
  • Buy From Grainger  Home Depot  Buy From The Paint Store  Amazon Supply
  • 4 OZ
  • 046647
  • Grainger  Home Depot  Buy From The Paint Store  Amazon Supply
  • 32 OZ
  • 326329
  • Grainger  Home Depot  Buy From The Paint Store  Amazon Supply
  • 50 ML
  • 000502
  • Buy From Grainger  Buy From Home Depot  Buy From The Paint Store  Amazon Supply
  • 50 ML Kit
  • 000588
  • Buy From Grainger  Buy From Home Depot  Buy From The Paint Store  Amazon Supply
  • 300 ML
  • 003008
  • Grainger  Home Depot  Buy From The Paint Store  Amazon Supply
  • 90 LB
  •  
  • Grainger  Home Depot  Buy From The Paint Store  Amazon Supply

Mixing Tips:

In cold or cool temperatures, place PC-Super Epoxy® container near heat prior to using. PC-Super Epoxy® mixes and spreads easier at 80°F than at 40 F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-Super Epoxy®.

Denatured alcohol is excellent for smoothing applied PC-Super Epoxy®. Also use Denatured alcohol to clean surfaces before applying.

***Note: Most epoxies are temperature sensitive and will cure faster at higher temperatures and slower at cooler temperatures. Speed cure with artificial heat.

PC-Super Epoxy® has hundreds, if not thousands, of uses.

As Adhesive: Wood, Metal (all types), Glass, Brick, Block, Rubber, Concrete, Stone, Slate, Fiberglass, tile, and more in any and all combinations.
As Sealant: Oil, Gas, Water Tanks, Cellar Cracks, Pressure Tanks, and Plumbing Leaks.
As a Filler: Holes, Castings, Patterns, Molds, Voids, Welds, Steering Wheels and much more.
View All Uses

Physical Properties

  • Color (Component a):
  • Light Yellow
  • Color (Component B):
  • Blue
  • Color (Mixed):
  • Translucent
  • Work Time (70°F):
  • 15 Minutes
  • Tack Free Cure Time:
  • 45 Minutes
  • Cure for Service:
  • 3-4 Hours
  • Maximum Cure:
  • 3-7 Day
  • Gardner Impact Resistance:
  • 160 in./Lb
  • Elongation:
  • 2%
  • Conduction (Electric):
  • Non Conductive
  • Thermal Shock:
  • Excellent
  • Toxicity:
  • Non Toxic Once Cured
  • Heat Range:
  • -20 to 200°F

Test Methods/Results

  • Tensile Shear Strength
  • ASTM D 1002
  • 2650 PSI
  • Compressive Yield
  • ASTM D 695
  • 4685 PSI
  • Flexural Strength
  • ASTM C 580
  • 2920 PSI
  • Water Absorption
  • ASTM C 413
  • 0.44%
  • Weight(Specific Gravity)
  • ASTM D 792
  • 1.09g/cm³ .630oz/in³
  • Hardness Shored
  • ASTM D 2240
  • 78 (1wk)
  • Heat Deflection
  • ASTM D 648
  • 120°F

Technical Data

Spanish/French