Mixing Tips:
In cold or cool temperatures, place PC-Super Epoxy® container near heat prior to using. PC-Super Epoxy® mixes and spreads easier at 80°F than at 40 F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-Super Epoxy®.
Denatured alcohol is excellent for smoothing applied PC-Super Epoxy®. Also use Denatured alcohol to clean surfaces before applying.
***Note: Most epoxies are temperature sensitive and will cure faster at higher temperatures and slower at cooler temperatures. Speed cure with artificial heat.
Directions:
1OZ SYRINGE
Remove storage cap from plunger and keep available.
Cut tips off end of dispenser(be careful)
Depress plunger evenly to dispense equal amounts of resin and hardener. Back off plunger to reduce flow.
Mix thoroughly on flat surface using a mixing stick or putty knife until blue disappears
Replace storage cap on nozzle
STATIC INJECTORS- 300ML
Remove collar and nozzle plug.
Insert mixing nozzle into collar and attach to cartridge.
Load cartridge into dispensing gun.
Dispense epoxy. To stop flow press gun brake.
Remove nozzle and reinsert nozzle plug or dispose of empty cartridge in proper way.
STATIC INJECTORS-50ML
Remove nozzle cap (1/4 turn)
Attach nozzle (1/4 turn)
Insert cartridge into dispensing gun
Dispense epoxy. To stop flow press gun brake.
Remove nozzle (1/4 turn) and reinsert nozzle cap or dispose of empty cartridge in proper way.
CONTAINERS
Using separate knives to remove amount needed, mix equal parts A (light yellow) and B (blue) on flat clean surface until uniform color is achieved. Surfaces to be bonded must be free of dirt, oil, rust, ect. Denatured alcohol can be used to prep the surface. For best results, rough up the surface to be bonded. Normally, no vice or clamp needed. Prop or tape heavy objects to a wall or ceiling.
Applications:
Apply PC-Super Epoxy® in any thickness to both sides of surface and bring together firmly. Be careful to insure that ample PC-Super Epoxy® remains between the contact surfaces. Use screen wire or fiberglass cloth to reinforce large voids and gaps. To smooth out work, dip tool in lacquer thinner or denatured alcohol.
After cure: Paint Drill, Machine, Sand, File, Tap, or Saw.
PC-Super Epoxy® has hundreds if not thousands of uses.
As Adhesive: Wood, Metal (all types), Glass, Brick, Block, Rubber, Concrete, Stone, Slate, Fiberglass, tile, and more in any and all combinations.
As Sealant: Oil, Gas, Water Tanks, Cellar Cracks, Pressure Tanks, and Plumbing Leaks.
As a Filler: Holes, Castings, Patterns, Molds, Voids, Welds, Steering Wheels and much more.
|
